Synco - G2A1 - 2.4G Wireless Mic

Portable Wireless Microphone SYNCO G2(A1)

The G2 is the 2nd generation portable wireless microphone of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable.

It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology.

Similar to the G1, this wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2).

The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.

Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System

Different from G1, either the transmitter or the receiver of this new microphone wireless at 2.4G carries a true-color TFT display to make the device readable under different light intensities.

The recording mode, battery status, and audio level are all seeable. 

Upgraded Algorithm for More Stable, Safe Transmission

The SyncoderTM Encrypted Transmission Algorithm 2.0 in this professional small wireless microphone enhances the signal stability within 492ft/150m (Line-Of-Sight)

and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location

and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.

Integrated Signal Processing for Little Latency Sound Production

The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing,

and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.

 

Quick Charge for Every Continued Filming

The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source.

It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged. 

Small Features Packed For Each Optimization

A button is designed to mute this wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must.

The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, hence making sure that the system works under more conditions.

Pocket Size for Invisible but Audible Effect

Mobile content creators would like the mini wireless microphone G2. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized,

easy to be concealed and inconspicuous in most recording scenarios.

SPECIFICATIONS:

Transmitter (TX )

Wireless Transmission - Digital 2.4GHz

RF Frequency Band   2400-2483.5MHz

Frequency Response.  20Hz-20KHz

Working Distance - 492ft/150m(LOS area),

                                  164ft/50m(NLOS area)

Mounting - Pocket Clip

Audio Input - 1/8" / 3.5mm TRS Mic Input

Audio Input Level - 1V (0dBV)

RF Output Power.  ＜10mW

Power Requirements - 3.3V-4.7V

Battery Type - Built-in Lithium Battery, 400mAh

Battery Charging Time - 1.5h

Battery Life - 8h

Display - TFT Screen

Dimensions - 52×42×17mm

Material - Plastic

Weight - 39g

Receiver (RX)

Wireless Transmission - Digital 2.4GHz

RF Frequency Band   2400-2483.5MHz

Approximate RF Sensitivity.  -81dBm

Working Distance - 492ft/150m(LOS area),

                                  164ft/50m(NLOS area)

Mounting - Pocket Clip

Number of Audio Channels - 1

Audio Output - 1/8” / 3.5mm TRS Mic Output

                            1/8“ / 3.5mm TRS Headphone Output

Gain - 0-5 Level

Audio Output Level - Line Out: 1V; Monitoring: 25-30mW

Power Requirements - 3.3V-4.7V

Battery Type - Built-in Lithium Battery, 400mAh

Battery Charging Time - 1.5h

Battery Life - 8h

Display - TFT Screen

Dimensions - 52×42×17mm

Material - Plastic

Weight - 39g

Microphone

Form Factor - Built-in/External Mic

Sound Field - Mono

Polar Pattern - Omnidirectional

Frequency Range - 50Hz-20KHz

Sensitivity.  -40dB (±3 dB, re 1V/Pa at 1KHz)

Max. SPL - 135dB SPL (at 1KHz)