Description:

2M Series styli interchangeability:

The 2M Series' engines, coils and magnets configurations are not identical: Red and Blue are identical, so are the Bronze and Black and so are the true mono variants 2M Mono and 2M 78. Likewise, 2M series styli are interchangeable within the below combinations:

- 2M Red, 2M Blue and 2M Silver

- 2M Bronze and 2M Black

- 2M Mono and 2M 78

Exclusive Plug-and-Play MkII solution

The 2M headshell is a practical and elegant solution for our customers who wish direct and easy mounting and replacement on their S-shaped tonearm. The combination of 2M Headshell and 2M Series cartridge adds unique distinction to the turntable!

Features:

- Universal mount fitting a wide range of S-shaped tonearms.

- Weight with a 2M cartridge pre-mounted 20 g.

- The headshell body is manufactured from a special compound used for Medical industry, ensures high rigidity while reducing unwanted vibration

- Elegant hi-tech design

- Length 52mm. Headshell with a 2M cartridge pre-mounted provides correct Baerwald alignment with the Ortofon TA-110/ TA-210 tonearms, likewise with the major part of tonearms with universal mount

NB: available only with a 2M cartridge pre-mounted on the headshell.

Compatibility with Rega brand TT/TA:

REGA brand cartridges’ height from stylus tip to the top cartridge mounting surface is lower than standard. Therefore you would need spacers to ensure the correct set-up of the Ortofon cartridge. Please read about cartridge set-up and alignment on tonearm on our FAQ.

Adjusting the height of your Rega tonearm is easy with Acoustic Signature's Spacer Set. It allows you to adjust the height from 0.5 mm to 3.5 mm in precise steps of 0.5 mm - without removing the tonearm. Simply loosen the screws, insert the AS-spacer, then lock the screws back down, and your tonearm is ready to play.

3.2 - 4 mm spacers should be enough for 2M cartridge.

Output voltage at 1000 Hz, 5cm/sec. - 5.5 mV

Channel balance at 1 kHz - 1.5 dB